Udemy Geometric Dimensioning and Tolerancing GD T Basics
Seeders : 7 Leechers : 3
| Torrent Hash : | 8CB28B2FF708FDE70761591CE22935DDCD46E2D6 |
| Torrent Added : | at Oct. 24, 2023, 4:19 p.m. in Other |
| Torrent Size : | 1.8 GB |
Knox
Udemy Geometric Dimensioning and Tolerancing GD T Basics
Fast And Direct Download Safely And Anonymously!
Fast And Direct Download Safely And Anonymously!
Note :
Please Update (Trackers Info) Before Start " Udemy Geometric Dimensioning and Tolerancing GD T Basics" Torrent Downloading to See Updated Seeders And Leechers for Batter Torrent Download Speed.Torrent File Content (3 files)
Udemy Geometric Dimensioning and Tolerancing GD T Basics
Get Bonus Downloads Here.url -
001 Introduction.mp4 -
001 Introduction_en.srt -
001 Introduction_en.vtt -
002 My Learning journey and a Learning guide to GD&T.mp4 -
002 My Learning journey and a Learning guide to GD&T_en.srt -
002 My Learning journey and a Learning guide to GD&T_en.vtt -
003 Importance of Engineering Drawing.mp4 -
003 Importance of Engineering Drawing_en.srt -
003 Importance of Engineering Drawing_en.vtt -
004 The Three Major stakeholders.mp4 -
004 The Three Major stakeholders_en.srt -
004 The Three Major stakeholders_en.vtt -
005 Quality of Drawing.mp4 -
005 Quality of Drawing_en.srt -
005 Quality of Drawing_en.vtt -
006 Cost Of Drawing Error.mp4 -
006 Cost Of Drawing Error_en.srt -
006 Cost Of Drawing Error_en.vtt -
007 Examples of Drawing error.mp4 -
007 Examples of Drawing error_en.srt -
007 Examples of Drawing error_en.vtt -
008 3D Model to 2D representation.mp4 -
008 3D Model to 2D representation_en.srt -
008 3D Model to 2D representation_en.vtt -
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection.mp4 -
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.srt -
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.vtt -
010 What is Dimensioning_.mp4 -
010 What is Dimensioning__en.srt -
010 What is Dimensioning__en.vtt -
011 Concept of Tolerance.mp4 -
011 Concept of Tolerance_en.srt -
011 Concept of Tolerance_en.vtt -
012 Ways of representing tolerance.mp4 -
012 Ways of representing tolerance_en.srt -
012 Ways of representing tolerance_en.vtt -
013 Fits in Mechanical Assemblies.mp4 -
013 Fits in Mechanical Assemblies_en.srt -
013 Fits in Mechanical Assemblies_en.vtt -
014 Types of Fits and Selection.mp4 -
014 Types of Fits and Selection_en.srt -
014 Types of Fits and Selection_en.vtt -
015 Examples of types of fits.mp4 -
015 Examples of types of fits_en.srt -
015 Examples of types of fits_en.vtt -
016 How is Tolerance decided_.mp4 -
016 How is Tolerance decided__en.srt -
016 How is Tolerance decided__en.vtt -
017 Drawing with Tolerances.mp4 -
017 Drawing with Tolerances_en.srt -
017 Drawing with Tolerances_en.vtt -
018 Engineering Drawing Template.mp4 -
018 Engineering Drawing Template_en.srt -
018 Engineering Drawing Template_en.vtt -
019 Examples of Engineering drawings.mp4 -
019 Examples of Engineering drawings_en.srt -
019 Examples of Engineering drawings_en.vtt -
020 Need from the Drawing.mp4 -
020 Need from the Drawing_en.srt -
020 Need from the Drawing_en.vtt -
021 What is a Feature_.mp4 -
021 What is a Feature__en.srt -
021 What is a Feature__en.vtt -
022 Examples on Features and non features.mp4 -
022 Examples on Features and non features_en.srt -
022 Examples on Features and non features_en.vtt -
023 Dimension types on drawings.mp4 -
023 Dimension types on drawings_en.srt -
023 Dimension types on drawings_en.vtt -
024 How is Inspection of parts done_.mp4 -
024 How is Inspection of parts done__en.srt -
024 How is Inspection of parts done__en.vtt -
025 Examples of inspection of a part.mp4 -
025 Examples of inspection of a part_en.srt -
025 Examples of inspection of a part_en.vtt -
026 CMM inspection.mp4 -
026 CMM inspection_en.srt -
026 CMM inspection_en.vtt -
001 Tolerancing a pin with a gauge hole.mp4 -
001 Tolerancing a pin with a gauge hole_en.srt -
001 Tolerancing a pin with a gauge hole_en.vtt -
002 Issue with Traditional tolerancing - No Relative control of features.mp4 -
002 Issue with Traditional tolerancing - No Relative control of features_en.srt -
002 Issue with Traditional tolerancing - No Relative control of features_en.vtt -
003 Issue with Traditional tolerancing - Ambiguity in Inspection.mp4 -
003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.srt -
003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.vtt -
004 Issue with Traditional tolerancing - No Assembly consideration.mp4 -
004 Issue with Traditional tolerancing - No Assembly consideration_en.srt -
004 Issue with Traditional tolerancing - No Assembly consideration_en.vtt -
005 Issue with Traditional tolerancing - No control of Profiles.mp4 -
005 Issue with Traditional tolerancing - No control of Profiles_en.srt -
005 Issue with Traditional tolerancing - No control of Profiles_en.vtt -
006 Why GD&T is needed_.mp4 -
006 Why GD&T is needed__en.srt -
006 Why GD&T is needed__en.vtt -
007 Example of Parallel faces.mp4 -
007 Example of Parallel faces_en.srt -
007 Example of Parallel faces_en.vtt -
008 T slots example.mp4 -
008 T slots example_en.srt -
008 T slots example_en.vtt -
009 Poppet of Valve example.mp4 -
009 Poppet of Valve example_en.srt -
009 Poppet of Valve example_en.vtt -
010 When to use Co ordinate tolerancing and when not.html -
001 Origins of GD&T.mp4 -
001 Origins of GD&T_en.srt -
001 Origins of GD&T_en.vtt -
002 Size, Form, Orientation and Location.mp4 -
002 Size, Form, Orientation and Location_en.srt -
002 Size, Form, Orientation and Location_en.vtt -
003 What is GD&T _ What are the important concepts_.mp4 -
003 What is GD&T _ What are the important concepts__en.srt -
003 What is GD&T _ What are the important concepts__en.vtt -
004 The Feature control Frame.mp4 -
004 The Feature control Frame_en.srt -
004 The Feature control Frame_en.vtt -
005 Basic Dimensions.mp4 -
005 Basic Dimensions_en.srt -
005 Basic Dimensions_en.vtt -
006 Common Drafting Errors- Basic dimensions and Feature control frame.mp4 -
006 Common Drafting Errors- Basic dimensions and Feature control frame_en.srt -
006 Common Drafting Errors- Basic dimensions and Feature control frame_en.vtt -
007 Feature of Size.mp4 -
007 Feature of Size_en.srt -
007 Feature of Size_en.vtt -
008 Identifying Feature of Size.mp4 -
008 Identifying Feature of Size_en.srt -
008 Identifying Feature of Size_en.vtt -
009 Identifying Feature of size Example 2.mp4 -
009 Identifying Feature of size Example 2_en.srt -
009 Identifying Feature of size Example 2_en.vtt -
010 Irregular Features of Size and comparison.mp4 -
010 Irregular Features of Size and comparison_en.srt -
010 Irregular Features of Size and comparison_en.vtt -
011 Comparison between GD&t and non GD&T.mp4 -
011 Comparison between GD&t and non GD&T_en.srt -
011 Comparison between GD&t and non GD&T_en.vtt -
012 Material Conditions.mp4 -
012 Material Conditions_en.srt -
012 Material Conditions_en.vtt -
013 Rule 1.mp4 -
013 Rule 1_en.srt -
013 Rule 1_en.vtt -
014 Rule 1 Examples and Over riding Rule 1.mp4 -
014 Rule 1 Examples and Over riding Rule 1_en.srt -
014 Rule 1 Examples and Over riding Rule 1_en.vtt -
015 Need for Reference.mp4 -
015 Need for Reference_en.srt -
015 Need for Reference_en.vtt -
001 Datums _ Introduction.mp4 -
001 Datums _ Introduction_en.srt -
001 Datums _ Introduction_en.vtt -
002 How Datums are Created.mp4 -
002 How Datums are Created_en.srt -
002 How Datums are Created_en.vtt -
003 Datum and Datum Feature , Terminology.mp4 -
003 Datum and Datum Feature , Terminology_en.srt -
003 Datum and Datum Feature , Terminology_en.vtt -
004 Datum Reference Frame.mp4 -
004 Datum Reference Frame_en.srt -
004 Datum Reference Frame_en.vtt -
005 Datum reference frame CAD demonstration.mp4 -
005 Datum reference frame CAD demonstration_en.srt -
005 Datum reference frame CAD demonstration_en.vtt -
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature.mp4 -
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.srt -
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.vtt -
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD.mp4 -
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.srt -
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.vtt -
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature.mp4 -
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.srt -
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.vtt -
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD.mp4 -
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.srt -
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.vtt -
010 Selection of Datums.mp4 -
010 Selection of Datums_en.srt -
010 Selection of Datums_en.vtt -
011 Simple Process of Applying Datums.mp4 -
011 Simple Process of Applying Datums_en.srt -
011 Simple Process of Applying Datums_en.vtt -
012 Examples of Datum Scheme selection.mp4 -
012 Examples of Datum Scheme selection_en.srt -
012 Examples of Datum Scheme selection_en.vtt -
013 Exercise in selection and sequencing of datums.mp4 -
013 Exercise in selection and sequencing of datums_en.srt -
013 Exercise in selection and sequencing of datums_en.vtt -
014 Tolerance Zone.mp4 -
014 Tolerance Zone_en.srt -
014 Tolerance Zone_en.vtt -
015 How GD&T Helps Inspection_.mp4 -
015 How GD&T Helps Inspection__en.srt -
015 How GD&T Helps Inspection__en.vtt -
016 Tolerance zone Comparison for Position control of Hole.mp4 -
016 Tolerance zone Comparison for Position control of Hole_en.srt -
016 Tolerance zone Comparison for Position control of Hole_en.vtt -
017 Comparison Summary.mp4 -
017 Comparison Summary_en.srt -
017 Comparison Summary_en.vtt -
018 Inspection Requirements.mp4 -
018 Inspection Requirements_en.srt -
018 Inspection Requirements_en.vtt -
36642420-EXERCISE-TRAINGLE-BRACKET.pdf -
001 Material Modifiers on Geometric tolerance.mp4 -
001 Material Modifiers on Geometric tolerance_en.srt -
001 Material Modifiers on Geometric tolerance_en.vtt -
002 Rule #2.mp4 -
002 Rule #2_en.srt -
002 Rule #2_en.vtt -
003 Material Modifiers Example.mp4 -
003 Material Modifiers Example_en.srt -
003 Material Modifiers Example_en.vtt -
004 Shaft Position Tolerance Brief.mp4 -
004 Shaft Position Tolerance Brief_en.srt -
004 Shaft Position Tolerance Brief_en.vtt -
005 Bonus Tolerance calculation- Shaft.mp4 -
005 Bonus Tolerance calculation- Shaft_en.srt -
005 Bonus Tolerance calculation- Shaft_en.vtt -
006 Hole position tolerance.mp4 -
006 Hole position tolerance_en.srt -
006 Hole position tolerance_en.vtt -
007 Bonus tolerance Hole.mp4 -
007 Bonus tolerance Hole_en.srt -
007 Bonus tolerance Hole_en.vtt -
008 Virtual Condition of Shaft.mp4 -
008 Virtual Condition of Shaft_en.srt -
008 Virtual Condition of Shaft_en.vtt -
009 Virtual Condition of Hole.mp4 -
009 Virtual Condition of Hole_en.srt -
009 Virtual Condition of Hole_en.vtt -
010 Condition for Successful Assembly.mp4 -
010 Condition for Successful Assembly_en.srt -
010 Condition for Successful Assembly_en.vtt -
011 Functional Gauging using Virtual condition.mp4 -
011 Functional Gauging using Virtual condition_en.srt -
011 Functional Gauging using Virtual condition_en.vtt -
012 Internal and External Boundaries.mp4 -
012 Internal and External Boundaries_en.srt -
012 Internal and External Boundaries_en.vtt -
013 Resultant Condition External Feature of Size at MMC.mp4 -
013 Resultant Condition External Feature of Size at MMC_en.srt -
013 Resultant Condition External Feature of Size at MMC_en.vtt -
014 Resultant Condition Internal Feature of Size at MMC.mp4 -
014 Resultant Condition Internal Feature of Size at MMC_en.srt -
014 Resultant Condition Internal Feature of Size at MMC_en.vtt -
015 Bonus Tolerances study for LMC modifier.mp4 -
015 Bonus Tolerances study for LMC modifier_en.srt -
015 Bonus Tolerances study for LMC modifier_en.vtt -
016 Resultant and Virtual conditions for LMC and Summary.mp4 -
016 Resultant and Virtual conditions for LMC and Summary_en.srt -
016 Resultant and Virtual conditions for LMC and Summary_en.vtt -
017 Example with LMC modifier and calculating minimum wall thickness.mp4 -
017 Example with LMC modifier and calculating minimum wall thickness_en.srt -
017 Example with LMC modifier and calculating minimum wall thickness_en.vtt -
018 Example 2 with LMC modifier and calculating minimum wall thickness.mp4 -
018 Example 2 with LMC modifier and calculating minimum wall thickness_en.srt -
018 Example 2 with LMC modifier and calculating minimum wall thickness_en.vtt -
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise.mp4 -
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.srt -
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.vtt -
020 Actual Mating Envelope.mp4 -
020 Actual Mating Envelope_en.srt -
020 Actual Mating Envelope_en.vtt -
001 Introduction to Planar Straightness and its inspection.mp4 -
001 Introduction to Planar Straightness and its inspection_en.srt -
001 Introduction to Planar Straightness and its inspection_en.vtt -
002 Straightness of Cylindrical surface.mp4 -
002 Straightness of Cylindrical surface_en.srt -
002 Straightness of Cylindrical surface_en.vtt -
003 Straightness of Axis and comparison.mp4 -
003 Straightness of Axis and comparison_en.srt -
003 Straightness of Axis and comparison_en.vtt -
004 Inspection of Axis straightness.mp4 -
004 Inspection of Axis straightness_en.srt -
004 Inspection of Axis straightness_en.vtt -
005 Material modifier in Axis straightness.mp4 -
005 Material modifier in Axis straightness_en.srt -
005 Material modifier in Axis straightness_en.vtt -
006 Inspecting Axis straightness with modifier using Functional Gauge.mp4 -
006 Inspecting Axis straightness with modifier using Functional Gauge_en.srt -
006 Inspecting Axis straightness with modifier using Functional Gauge_en.vtt -
007 Inspecting Axis straightness.mp4 -
007 Inspecting Axis straightness_en.srt -
007 Inspecting Axis straightness_en.vtt -
008 Applications of Straightness control.mp4 -
008 Applications of Straightness control_en.srt -
008 Applications of Straightness control_en.vtt -
009 Straightness applied differently in two directions.mp4 -
009 Straightness applied differently in two directions_en.srt -
009 Straightness applied differently in two directions_en.vtt -
010 Flatness and its Inspection.mp4 -
010 Flatness and its Inspection_en.srt -
010 Flatness and its Inspection_en.vtt -
011 How Flatness saves money.mp4 -
011 How Flatness saves money_en.srt -
011 How Flatness saves money_en.vtt -
012 Rule 1 and Flatness.mp4 -
012 Rule 1 and Flatness_en.srt -
012 Rule 1 and Flatness_en.vtt -
013 Summary of Flatness control.mp4 -
013 Summary of Flatness control_en.srt -
013 Summary of Flatness control_en.vtt -
014 Circularity.mp4 -
014 Circularity_en.srt -
014 Circularity_en.vtt -
015 Inspecting Circularity.mp4 -
015 Inspecting Circularity_en.srt -
015 Inspecting Circularity_en.vtt -
016 Cylindricity.mp4 -
016 Cylindricity_en.srt -
016 Cylindricity_en.vtt -
017 Inspecting Cylindricity.mp4 -
017 Inspecting Cylindricity_en.srt -
017 Inspecting Cylindricity_en.vtt -
018 Points on cylindricity and circularity.mp4 -
018 Points on cylindricity and circularity_en.srt -
018 Points on cylindricity and circularity_en.vtt -
019 Difference between Surface straightness control and cylindricity.mp4 -
019 Difference between Surface straightness control and cylindricity_en.srt -
019 Difference between Surface straightness control and cylindricity_en.vtt -
001 Angularity control.mp4 -
001 Angularity control_en.srt -
001 Angularity control_en.vtt -
002 Angularity Inspection.mp4 -
002 Angularity Inspection_en.srt -
002 Angularity Inspection_en.vtt -
003 Perpendicularity.mp4 -
003 Perpendicularity_en.srt -
003 Perpendicularity_en.vtt -
004 Inspecting Perpendicularity.mp4 -
004 Inspecting Perpendicularity_en.srt -
004 Inspecting Perpendicularity_en.vtt -
005 Perpendicularity of Feature of size.mp4 -
005 Perpendicularity of Feature of size_en.srt -
005 Perpendicularity of Feature of size_en.vtt -
006 Parallelism.mp4 -
006 Parallelism_en.srt -
006 Parallelism_en.vtt -
007 Inspection of Parallelism.mp4 -
007 Inspection of Parallelism_en.srt -
007 Inspection of Parallelism_en.vtt -
001 Position Control and its Inspection.mp4 -
001 Position Control and its Inspection_en.srt -
001 Position Control and its Inspection_en.vtt -
002 Comparison between Perpendicularity and position.mp4 -
002 Comparison between Perpendicularity and position_en.srt -
002 Comparison between Perpendicularity and position_en.vtt -
003 Concentricity.mp4 -
003 Concentricity_en.srt -
003 Concentricity_en.vtt -
004 Symmetry.mp4 -
004 Symmetry_en.srt -
004 Symmetry_en.vtt -
005 Example of Orientation + Position control - part 1.mp4 -
005 Example of Orientation + Position control - part 1_en.srt -
005 Example of Orientation + Position control - part 1_en.vtt -
006 Example of Orientation + Position control - part 2.mp4 -
006 Example of Orientation + Position control - part 2_en.srt -
006 Example of Orientation + Position control - part 2_en.vtt -
001 Circular Runout.mp4 -
001 Circular Runout_en.srt -
001 Circular Runout_en.vtt -
002 Circular Runout on Perpendicular Face.mp4 -
002 Circular Runout on Perpendicular Face_en.srt -
002 Circular Runout on Perpendicular Face_en.vtt -
003 Total Runout.mp4 -
003 Total Runout_en.srt -
003 Total Runout_en.vtt -
004 Total Runout on perpendicular face.mp4 -
004 Total Runout on perpendicular face_en.srt -
004 Total Runout on perpendicular face_en.vtt -
005 Applications of Runout.mp4 -
005 Applications of Runout_en.srt -
005 Applications of Runout_en.vtt -
006 Runout controls both Concentricity and Cylindricity.mp4 -
006 Runout controls both Concentricity and Cylindricity_en.srt -
006 Runout controls both Concentricity and Cylindricity_en.vtt -
007 Example of a Wheel rim.html -
001 Profile of a Line.mp4 -
001 Profile of a Line_en.srt -
001 Profile of a Line_en.vtt -
002 Profile of a surface and its Inspection.mp4 -
002 Profile of a surface and its Inspection_en.srt -
002 Profile of a surface and its Inspection_en.vtt -
003 Points on Profile tolerance.mp4 -
003 Points on Profile tolerance_en.srt -
003 Points on Profile tolerance_en.vtt -
004 Profile Control variation with Datums.html -
18480722-PROFILE-CONTROLS-DIFFER.pdf -
001 Datum Feature Modifier Introduction.mp4 -
001 Datum Feature Modifier Introduction_en.srt -
001 Datum Feature Modifier Introduction_en.vtt -
002 Datum feature modifier Example.mp4 -
002 Datum feature modifier Example_en.srt -
002 Datum feature modifier Example_en.vtt -
003 Datum feature modifier example continued.mp4 -
003 Datum feature modifier example continued_en.srt -
003 Datum feature modifier example continued_en.vtt -
004 Datum Shift Example no.2.mp4 -
004 Datum Shift Example no.2_en.srt -
004 Datum Shift Example no.2_en.vtt -
005 Datum reference frame is fixed.mp4 -
005 Datum reference frame is fixed_en.srt -
005 Datum reference frame is fixed_en.vtt -
006 Benefits of Datum shift.mp4 -
006 Benefits of Datum shift_en.srt -
006 Benefits of Datum shift_en.vtt -
007 It is not Bonus tolerance.mp4 -
007 It is not Bonus tolerance_en.srt -
007 It is not Bonus tolerance_en.vtt -
008 More Examples.html -
18480442-DATUM-SHIFT-examples.pdf -
001 TASK 1 - create drawing as per instructions.html -
002 TASK 2 _ Write the statement in words for feature control frame.html -
003 TASK 3 _ Create Drawing.html -
004 TASK 4 _ More Drawings of real parts for Interpretation.html -
18477580-TASK-1-KEY.jpg -
18477604-TASK-2.jpg -
18477664-TASK-3-KEY.jpg -
18477684-TASK-3-DRAWING-FOR-WORK.pdf -
18477742-TASK-4-DRAWINGS.pdf -
001 Bonus Lecture - More courses to explore engineering.html -
external-assets-links.txt -
Bonus Resources.txt -
Please login or create a FREE account to post comments
Get Bonus Downloads Here.url -
182 bytes
001 Introduction.mp4 -
68.3 MB
001 Introduction_en.srt -
2.9 KB
001 Introduction_en.vtt -
2.6 KB
002 My Learning journey and a Learning guide to GD&T.mp4 -
27.6 MB
002 My Learning journey and a Learning guide to GD&T_en.srt -
16.9 KB
002 My Learning journey and a Learning guide to GD&T_en.vtt -
14.9 KB
003 Importance of Engineering Drawing.mp4 -
10.3 MB
003 Importance of Engineering Drawing_en.srt -
2.7 KB
003 Importance of Engineering Drawing_en.vtt -
2.4 KB
004 The Three Major stakeholders.mp4 -
7.4 MB
004 The Three Major stakeholders_en.srt -
1.8 KB
004 The Three Major stakeholders_en.vtt -
1.7 KB
005 Quality of Drawing.mp4 -
5.8 MB
005 Quality of Drawing_en.srt -
1.5 KB
005 Quality of Drawing_en.vtt -
1.4 KB
006 Cost Of Drawing Error.mp4 -
11.5 MB
006 Cost Of Drawing Error_en.srt -
2.8 KB
006 Cost Of Drawing Error_en.vtt -
2.5 KB
007 Examples of Drawing error.mp4 -
8.3 MB
007 Examples of Drawing error_en.srt -
3.9 KB
007 Examples of Drawing error_en.vtt -
3.4 KB
008 3D Model to 2D representation.mp4 -
5.7 MB
008 3D Model to 2D representation_en.srt -
1.8 KB
008 3D Model to 2D representation_en.vtt -
1.6 KB
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection.mp4 -
25.3 MB
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.srt -
13.1 KB
009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.vtt -
11.5 KB
010 What is Dimensioning_.mp4 -
7.0 MB
010 What is Dimensioning__en.srt -
2.2 KB
010 What is Dimensioning__en.vtt -
2.0 KB
011 Concept of Tolerance.mp4 -
16.7 MB
011 Concept of Tolerance_en.srt -
3.4 KB
011 Concept of Tolerance_en.vtt -
3.1 KB
012 Ways of representing tolerance.mp4 -
5.9 MB
012 Ways of representing tolerance_en.srt -
2.2 KB
012 Ways of representing tolerance_en.vtt -
1.9 KB
013 Fits in Mechanical Assemblies.mp4 -
4.7 MB
013 Fits in Mechanical Assemblies_en.srt -
1.2 KB
013 Fits in Mechanical Assemblies_en.vtt -
1.1 KB
014 Types of Fits and Selection.mp4 -
29.2 MB
014 Types of Fits and Selection_en.srt -
6.3 KB
014 Types of Fits and Selection_en.vtt -
5.6 KB
015 Examples of types of fits.mp4 -
7.5 MB
015 Examples of types of fits_en.srt -
5.0 KB
015 Examples of types of fits_en.vtt -
4.4 KB
016 How is Tolerance decided_.mp4 -
38.8 MB
016 How is Tolerance decided__en.srt -
17.4 KB
016 How is Tolerance decided__en.vtt -
15.4 KB
017 Drawing with Tolerances.mp4 -
15.0 MB
017 Drawing with Tolerances_en.srt -
3.9 KB
017 Drawing with Tolerances_en.vtt -
3.5 KB
018 Engineering Drawing Template.mp4 -
17.1 MB
018 Engineering Drawing Template_en.srt -
3.1 KB
018 Engineering Drawing Template_en.vtt -
2.7 KB
019 Examples of Engineering drawings.mp4 -
6.3 MB
019 Examples of Engineering drawings_en.srt -
3.1 KB
019 Examples of Engineering drawings_en.vtt -
2.7 KB
020 Need from the Drawing.mp4 -
23.2 MB
020 Need from the Drawing_en.srt -
5.3 KB
020 Need from the Drawing_en.vtt -
4.7 KB
021 What is a Feature_.mp4 -
8.4 MB
021 What is a Feature__en.srt -
1.9 KB
021 What is a Feature__en.vtt -
1.7 KB
022 Examples on Features and non features.mp4 -
9.0 MB
022 Examples on Features and non features_en.srt -
4.4 KB
022 Examples on Features and non features_en.vtt -
3.9 KB
023 Dimension types on drawings.mp4 -
10.0 MB
023 Dimension types on drawings_en.srt -
6.3 KB
023 Dimension types on drawings_en.vtt -
5.5 KB
024 How is Inspection of parts done_.mp4 -
37.5 MB
024 How is Inspection of parts done__en.srt -
5.8 KB
024 How is Inspection of parts done__en.vtt -
5.1 KB
025 Examples of inspection of a part.mp4 -
21.0 MB
025 Examples of inspection of a part_en.srt -
11.2 KB
025 Examples of inspection of a part_en.vtt -
9.9 KB
026 CMM inspection.mp4 -
7.4 MB
026 CMM inspection_en.srt -
2.8 KB
026 CMM inspection_en.vtt -
2.5 KB
001 Tolerancing a pin with a gauge hole.mp4 -
24.8 MB
001 Tolerancing a pin with a gauge hole_en.srt -
15.1 KB
001 Tolerancing a pin with a gauge hole_en.vtt -
13.2 KB
002 Issue with Traditional tolerancing - No Relative control of features.mp4 -
9.5 MB
002 Issue with Traditional tolerancing - No Relative control of features_en.srt -
2.6 KB
002 Issue with Traditional tolerancing - No Relative control of features_en.vtt -
2.3 KB
003 Issue with Traditional tolerancing - Ambiguity in Inspection.mp4 -
12.2 MB
003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.srt -
3.3 KB
003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.vtt -
2.9 KB
004 Issue with Traditional tolerancing - No Assembly consideration.mp4 -
10.7 MB
004 Issue with Traditional tolerancing - No Assembly consideration_en.srt -
1.8 KB
004 Issue with Traditional tolerancing - No Assembly consideration_en.vtt -
1.6 KB
005 Issue with Traditional tolerancing - No control of Profiles.mp4 -
11.2 MB
005 Issue with Traditional tolerancing - No control of Profiles_en.srt -
2.8 KB
005 Issue with Traditional tolerancing - No control of Profiles_en.vtt -
2.5 KB
006 Why GD&T is needed_.mp4 -
20.5 MB
006 Why GD&T is needed__en.srt -
4.3 KB
006 Why GD&T is needed__en.vtt -
3.9 KB
007 Example of Parallel faces.mp4 -
7.5 MB
007 Example of Parallel faces_en.srt -
4.8 KB
007 Example of Parallel faces_en.vtt -
4.3 KB
008 T slots example.mp4 -
7.6 MB
008 T slots example_en.srt -
5.0 KB
008 T slots example_en.vtt -
4.4 KB
009 Poppet of Valve example.mp4 -
6.0 MB
009 Poppet of Valve example_en.srt -
3.9 KB
009 Poppet of Valve example_en.vtt -
3.4 KB
010 When to use Co ordinate tolerancing and when not.html -
141 bytes
001 Origins of GD&T.mp4 -
11.3 MB
001 Origins of GD&T_en.srt -
2.1 KB
001 Origins of GD&T_en.vtt -
1.9 KB
002 Size, Form, Orientation and Location.mp4 -
19.7 MB
002 Size, Form, Orientation and Location_en.srt -
5.9 KB
002 Size, Form, Orientation and Location_en.vtt -
5.2 KB
003 What is GD&T _ What are the important concepts_.mp4 -
10.4 MB
003 What is GD&T _ What are the important concepts__en.srt -
2.9 KB
003 What is GD&T _ What are the important concepts__en.vtt -
2.6 KB
004 The Feature control Frame.mp4 -
26.6 MB
004 The Feature control Frame_en.srt -
4.1 KB
004 The Feature control Frame_en.vtt -
3.6 KB
005 Basic Dimensions.mp4 -
12.8 MB
005 Basic Dimensions_en.srt -
2.3 KB
005 Basic Dimensions_en.vtt -
2.1 KB
006 Common Drafting Errors- Basic dimensions and Feature control frame.mp4 -
6.1 MB
006 Common Drafting Errors- Basic dimensions and Feature control frame_en.srt -
4.5 KB
006 Common Drafting Errors- Basic dimensions and Feature control frame_en.vtt -
3.9 KB
007 Feature of Size.mp4 -
14.9 MB
007 Feature of Size_en.srt -
2.6 KB
007 Feature of Size_en.vtt -
2.3 KB
008 Identifying Feature of Size.mp4 -
16.2 MB
008 Identifying Feature of Size_en.srt -
3.5 KB
008 Identifying Feature of Size_en.vtt -
3.1 KB
009 Identifying Feature of size Example 2.mp4 -
5.6 MB
009 Identifying Feature of size Example 2_en.srt -
3.2 KB
009 Identifying Feature of size Example 2_en.vtt -
2.8 KB
010 Irregular Features of Size and comparison.mp4 -
11.7 MB
010 Irregular Features of Size and comparison_en.srt -
8.9 KB
010 Irregular Features of Size and comparison_en.vtt -
7.9 KB
011 Comparison between GD&t and non GD&T.mp4 -
6.7 MB
011 Comparison between GD&t and non GD&T_en.srt -
3.9 KB
011 Comparison between GD&t and non GD&T_en.vtt -
3.5 KB
012 Material Conditions.mp4 -
9.2 MB
012 Material Conditions_en.srt -
2.5 KB
012 Material Conditions_en.vtt -
2.2 KB
013 Rule 1.mp4 -
27.1 MB
013 Rule 1_en.srt -
4.6 KB
013 Rule 1_en.vtt -
4.1 KB
014 Rule 1 Examples and Over riding Rule 1.mp4 -
8.6 MB
014 Rule 1 Examples and Over riding Rule 1_en.srt -
5.6 KB
014 Rule 1 Examples and Over riding Rule 1_en.vtt -
5.0 KB
015 Need for Reference.mp4 -
16.4 MB
015 Need for Reference_en.srt -
2.4 KB
015 Need for Reference_en.vtt -
2.1 KB
001 Datums _ Introduction.mp4 -
4.9 MB
001 Datums _ Introduction_en.srt -
1.4 KB
001 Datums _ Introduction_en.vtt -
1.2 KB
002 How Datums are Created.mp4 -
31.6 MB
002 How Datums are Created_en.srt -
6.2 KB
002 How Datums are Created_en.vtt -
5.5 KB
003 Datum and Datum Feature , Terminology.mp4 -
10.3 MB
003 Datum and Datum Feature , Terminology_en.srt -
2.9 KB
003 Datum and Datum Feature , Terminology_en.vtt -
2.6 KB
004 Datum Reference Frame.mp4 -
11.5 MB
004 Datum Reference Frame_en.srt -
2.5 KB
004 Datum Reference Frame_en.vtt -
2.2 KB
005 Datum reference frame CAD demonstration.mp4 -
8.7 MB
005 Datum reference frame CAD demonstration_en.srt -
4.9 KB
005 Datum reference frame CAD demonstration_en.vtt -
4.3 KB
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature.mp4 -
16.5 MB
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.srt -
3.0 KB
006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.vtt -
2.7 KB
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD.mp4 -
6.4 MB
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.srt -
1.8 KB
007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.vtt -
1.6 KB
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature.mp4 -
16.7 MB
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.srt -
3.1 KB
008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.vtt -
2.8 KB
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD.mp4 -
7.0 MB
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.srt -
2.3 KB
009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.vtt -
2.0 KB
010 Selection of Datums.mp4 -
19.5 MB
010 Selection of Datums_en.srt -
5.0 KB
010 Selection of Datums_en.vtt -
4.4 KB
011 Simple Process of Applying Datums.mp4 -
8.0 MB
011 Simple Process of Applying Datums_en.srt -
2.9 KB
011 Simple Process of Applying Datums_en.vtt -
2.6 KB
012 Examples of Datum Scheme selection.mp4 -
17.2 MB
012 Examples of Datum Scheme selection_en.srt -
9.0 KB
012 Examples of Datum Scheme selection_en.vtt -
7.9 KB
013 Exercise in selection and sequencing of datums.mp4 -
8.9 MB
013 Exercise in selection and sequencing of datums_en.srt -
4.0 KB
013 Exercise in selection and sequencing of datums_en.vtt -
3.5 KB
014 Tolerance Zone.mp4 -
8.3 MB
014 Tolerance Zone_en.srt -
2.8 KB
014 Tolerance Zone_en.vtt -
2.5 KB
015 How GD&T Helps Inspection_.mp4 -
10.7 MB
015 How GD&T Helps Inspection__en.srt -
2.4 KB
015 How GD&T Helps Inspection__en.vtt -
2.1 KB
016 Tolerance zone Comparison for Position control of Hole.mp4 -
14.9 MB
016 Tolerance zone Comparison for Position control of Hole_en.srt -
3.2 KB
016 Tolerance zone Comparison for Position control of Hole_en.vtt -
2.8 KB
017 Comparison Summary.mp4 -
5.8 MB
017 Comparison Summary_en.srt -
1.7 KB
017 Comparison Summary_en.vtt -
1.5 KB
018 Inspection Requirements.mp4 -
9.6 MB
018 Inspection Requirements_en.srt -
2.5 KB
018 Inspection Requirements_en.vtt -
2.2 KB
36642420-EXERCISE-TRAINGLE-BRACKET.pdf -
11.3 KB
001 Material Modifiers on Geometric tolerance.mp4 -
17.6 MB
001 Material Modifiers on Geometric tolerance_en.srt -
3.6 KB
001 Material Modifiers on Geometric tolerance_en.vtt -
3.2 KB
002 Rule #2.mp4 -
15.3 MB
002 Rule #2_en.srt -
6.8 KB
002 Rule #2_en.vtt -
6.0 KB
003 Material Modifiers Example.mp4 -
19.2 MB
003 Material Modifiers Example_en.srt -
3.4 KB
003 Material Modifiers Example_en.vtt -
3.0 KB
004 Shaft Position Tolerance Brief.mp4 -
1.9 MB
004 Shaft Position Tolerance Brief_en.srt -
1.5 KB
004 Shaft Position Tolerance Brief_en.vtt -
1.3 KB
005 Bonus Tolerance calculation- Shaft.mp4 -
20.9 MB
005 Bonus Tolerance calculation- Shaft_en.srt -
4.2 KB
005 Bonus Tolerance calculation- Shaft_en.vtt -
3.7 KB
006 Hole position tolerance.mp4 -
6.9 MB
006 Hole position tolerance_en.srt -
1.7 KB
006 Hole position tolerance_en.vtt -
1.5 KB
007 Bonus tolerance Hole.mp4 -
11.2 MB
007 Bonus tolerance Hole_en.srt -
2.3 KB
007 Bonus tolerance Hole_en.vtt -
2.0 KB
008 Virtual Condition of Shaft.mp4 -
11.5 MB
008 Virtual Condition of Shaft_en.srt -
2.8 KB
008 Virtual Condition of Shaft_en.vtt -
2.5 KB
009 Virtual Condition of Hole.mp4 -
9.3 MB
009 Virtual Condition of Hole_en.srt -
2.7 KB
009 Virtual Condition of Hole_en.vtt -
2.4 KB
010 Condition for Successful Assembly.mp4 -
7.6 MB
010 Condition for Successful Assembly_en.srt -
1.1 KB
010 Condition for Successful Assembly_en.vtt -
981 bytes
011 Functional Gauging using Virtual condition.mp4 -
10.0 MB
011 Functional Gauging using Virtual condition_en.srt -
1.8 KB
011 Functional Gauging using Virtual condition_en.vtt -
1.7 KB
012 Internal and External Boundaries.mp4 -
6.6 MB
012 Internal and External Boundaries_en.srt -
1.0 KB
012 Internal and External Boundaries_en.vtt -
947 bytes
013 Resultant Condition External Feature of Size at MMC.mp4 -
22.8 MB
013 Resultant Condition External Feature of Size at MMC_en.srt -
3.1 KB
013 Resultant Condition External Feature of Size at MMC_en.vtt -
2.7 KB
014 Resultant Condition Internal Feature of Size at MMC.mp4 -
15.1 MB
014 Resultant Condition Internal Feature of Size at MMC_en.srt -
2.5 KB
014 Resultant Condition Internal Feature of Size at MMC_en.vtt -
2.2 KB
015 Bonus Tolerances study for LMC modifier.mp4 -
10.8 MB
015 Bonus Tolerances study for LMC modifier_en.srt -
7.1 KB
015 Bonus Tolerances study for LMC modifier_en.vtt -
6.3 KB
016 Resultant and Virtual conditions for LMC and Summary.mp4 -
29.5 MB
016 Resultant and Virtual conditions for LMC and Summary_en.srt -
4.2 KB
016 Resultant and Virtual conditions for LMC and Summary_en.vtt -
10.0 KB
017 Example with LMC modifier and calculating minimum wall thickness.mp4 -
12.2 MB
017 Example with LMC modifier and calculating minimum wall thickness_en.srt -
6.4 KB
017 Example with LMC modifier and calculating minimum wall thickness_en.vtt -
5.7 KB
018 Example 2 with LMC modifier and calculating minimum wall thickness.mp4 -
7.7 MB
018 Example 2 with LMC modifier and calculating minimum wall thickness_en.srt -
4.8 KB
018 Example 2 with LMC modifier and calculating minimum wall thickness_en.vtt -
4.2 KB
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise.mp4 -
26.9 MB
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.srt -
2.8 KB
019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.vtt -
13.7 KB
020 Actual Mating Envelope.mp4 -
19.6 MB
020 Actual Mating Envelope_en.srt -
4.5 KB
020 Actual Mating Envelope_en.vtt -
4.0 KB
001 Introduction to Planar Straightness and its inspection.mp4 -
22.2 MB
001 Introduction to Planar Straightness and its inspection_en.srt -
3.9 KB
001 Introduction to Planar Straightness and its inspection_en.vtt -
3.5 KB
002 Straightness of Cylindrical surface.mp4 -
24.1 MB
002 Straightness of Cylindrical surface_en.srt -
3.3 KB
002 Straightness of Cylindrical surface_en.vtt -
2.9 KB
003 Straightness of Axis and comparison.mp4 -
27.0 MB
003 Straightness of Axis and comparison_en.srt -
4.6 KB
003 Straightness of Axis and comparison_en.vtt -
4.1 KB
004 Inspection of Axis straightness.mp4 -
15.4 MB
004 Inspection of Axis straightness_en.srt -
2.9 KB
004 Inspection of Axis straightness_en.vtt -
2.5 KB
005 Material modifier in Axis straightness.mp4 -
12.4 MB
005 Material modifier in Axis straightness_en.srt -
3.1 KB
005 Material modifier in Axis straightness_en.vtt -
2.7 KB
006 Inspecting Axis straightness with modifier using Functional Gauge.mp4 -
7.4 MB
006 Inspecting Axis straightness with modifier using Functional Gauge_en.srt -
2.4 KB
006 Inspecting Axis straightness with modifier using Functional Gauge_en.vtt -
2.1 KB
007 Inspecting Axis straightness.mp4 -
6.6 MB
007 Inspecting Axis straightness_en.srt -
2.0 KB
007 Inspecting Axis straightness_en.vtt -
1.8 KB
008 Applications of Straightness control.mp4 -
9.7 MB
008 Applications of Straightness control_en.srt -
2.5 KB
008 Applications of Straightness control_en.vtt -
2.2 KB
009 Straightness applied differently in two directions.mp4 -
5.5 MB
009 Straightness applied differently in two directions_en.srt -
1.8 KB
009 Straightness applied differently in two directions_en.vtt -
1.6 KB
010 Flatness and its Inspection.mp4 -
18.5 MB
010 Flatness and its Inspection_en.srt -
4.8 KB
010 Flatness and its Inspection_en.vtt -
4.2 KB
011 How Flatness saves money.mp4 -
7.6 MB
011 How Flatness saves money_en.srt -
2.0 KB
011 How Flatness saves money_en.vtt -
1.8 KB
012 Rule 1 and Flatness.mp4 -
3.4 MB
012 Rule 1 and Flatness_en.srt -
1.2 KB
012 Rule 1 and Flatness_en.vtt -
1.0 KB
013 Summary of Flatness control.mp4 -
13.5 MB
013 Summary of Flatness control_en.srt -
2.9 KB
013 Summary of Flatness control_en.vtt -
2.5 KB
014 Circularity.mp4 -
13.3 MB
014 Circularity_en.srt -
2.8 KB
014 Circularity_en.vtt -
2.5 KB
015 Inspecting Circularity.mp4 -
11.8 MB
015 Inspecting Circularity_en.srt -
2.0 KB
015 Inspecting Circularity_en.vtt -
1.8 KB
016 Cylindricity.mp4 -
8.2 MB
016 Cylindricity_en.srt -
2.1 KB
016 Cylindricity_en.vtt -
1.8 KB
017 Inspecting Cylindricity.mp4 -
9.9 MB
017 Inspecting Cylindricity_en.srt -
1.6 KB
017 Inspecting Cylindricity_en.vtt -
1.4 KB
018 Points on cylindricity and circularity.mp4 -
8.2 MB
018 Points on cylindricity and circularity_en.srt -
2.2 KB
018 Points on cylindricity and circularity_en.vtt -
1.9 KB
019 Difference between Surface straightness control and cylindricity.mp4 -
8.1 MB
019 Difference between Surface straightness control and cylindricity_en.srt -
2.2 KB
019 Difference between Surface straightness control and cylindricity_en.vtt -
1.9 KB
001 Angularity control.mp4 -
9.1 MB
001 Angularity control_en.srt -
2.3 KB
001 Angularity control_en.vtt -
2.0 KB
002 Angularity Inspection.mp4 -
13.4 MB
002 Angularity Inspection_en.srt -
2.4 KB
002 Angularity Inspection_en.vtt -
2.1 KB
003 Perpendicularity.mp4 -
6.4 MB
003 Perpendicularity_en.srt -
1.5 KB
003 Perpendicularity_en.vtt -
1.3 KB
004 Inspecting Perpendicularity.mp4 -
16.0 MB
004 Inspecting Perpendicularity_en.srt -
2.7 KB
004 Inspecting Perpendicularity_en.vtt -
2.5 KB
005 Perpendicularity of Feature of size.mp4 -
15.0 MB
005 Perpendicularity of Feature of size_en.srt -
2.9 KB
005 Perpendicularity of Feature of size_en.vtt -
2.6 KB
006 Parallelism.mp4 -
5.6 MB
006 Parallelism_en.srt -
1.6 KB
006 Parallelism_en.vtt -
1.4 KB
007 Inspection of Parallelism.mp4 -
9.2 MB
007 Inspection of Parallelism_en.srt -
1.3 KB
007 Inspection of Parallelism_en.vtt -
1.2 KB
001 Position Control and its Inspection.mp4 -
22.1 MB
001 Position Control and its Inspection_en.srt -
4.3 KB
001 Position Control and its Inspection_en.vtt -
3.8 KB
002 Comparison between Perpendicularity and position.mp4 -
10.4 MB
002 Comparison between Perpendicularity and position_en.srt -
2.9 KB
002 Comparison between Perpendicularity and position_en.vtt -
2.6 KB
003 Concentricity.mp4 -
7.0 MB
003 Concentricity_en.srt -
1.9 KB
003 Concentricity_en.vtt -
1.7 KB
004 Symmetry.mp4 -
10.4 MB
004 Symmetry_en.srt -
2.7 KB
004 Symmetry_en.vtt -
2.4 KB
005 Example of Orientation + Position control - part 1.mp4 -
18.5 MB
005 Example of Orientation + Position control - part 1_en.srt -
9.5 KB
005 Example of Orientation + Position control - part 1_en.vtt -
8.4 KB
006 Example of Orientation + Position control - part 2.mp4 -
9.7 MB
006 Example of Orientation + Position control - part 2_en.srt -
4.4 KB
006 Example of Orientation + Position control - part 2_en.vtt -
3.9 KB
001 Circular Runout.mp4 -
13.1 MB
001 Circular Runout_en.srt -
2.9 KB
001 Circular Runout_en.vtt -
2.5 KB
002 Circular Runout on Perpendicular Face.mp4 -
13.2 MB
002 Circular Runout on Perpendicular Face_en.srt -
2.5 KB
002 Circular Runout on Perpendicular Face_en.vtt -
2.2 KB
003 Total Runout.mp4 -
9.2 MB
003 Total Runout_en.srt -
2.3 KB
003 Total Runout_en.vtt -
2.0 KB
004 Total Runout on perpendicular face.mp4 -
9.5 MB
004 Total Runout on perpendicular face_en.srt -
2.3 KB
004 Total Runout on perpendicular face_en.vtt -
2.0 KB
005 Applications of Runout.mp4 -
13.0 MB
005 Applications of Runout_en.srt -
3.0 KB
005 Applications of Runout_en.vtt -
2.7 KB
006 Runout controls both Concentricity and Cylindricity.mp4 -
13.5 MB
006 Runout controls both Concentricity and Cylindricity_en.srt -
2.7 KB
006 Runout controls both Concentricity and Cylindricity_en.vtt -
2.4 KB
007 Example of a Wheel rim.html -
370 bytes
001 Profile of a Line.mp4 -
10.0 MB
001 Profile of a Line_en.srt -
2.1 KB
001 Profile of a Line_en.vtt -
1.9 KB
002 Profile of a surface and its Inspection.mp4 -
14.1 MB
002 Profile of a surface and its Inspection_en.srt -
3.7 KB
002 Profile of a surface and its Inspection_en.vtt -
3.3 KB
003 Points on Profile tolerance.mp4 -
3.7 MB
003 Points on Profile tolerance_en.srt -
1.2 KB
003 Points on Profile tolerance_en.vtt -
1.1 KB
004 Profile Control variation with Datums.html -
341 bytes
18480722-PROFILE-CONTROLS-DIFFER.pdf -
426.1 KB
001 Datum Feature Modifier Introduction.mp4 -
9.5 MB
001 Datum Feature Modifier Introduction_en.srt -
2.1 KB
001 Datum Feature Modifier Introduction_en.vtt -
1.9 KB
002 Datum feature modifier Example.mp4 -
21.7 MB
002 Datum feature modifier Example_en.srt -
4.3 KB
002 Datum feature modifier Example_en.vtt -
3.8 KB
003 Datum feature modifier example continued.mp4 -
21.5 MB
003 Datum feature modifier example continued_en.srt -
4.5 KB
003 Datum feature modifier example continued_en.vtt -
4.0 KB
004 Datum Shift Example no.2.mp4 -
17.9 MB
004 Datum Shift Example no.2_en.srt -
4.6 KB
004 Datum Shift Example no.2_en.vtt -
4.1 KB
005 Datum reference frame is fixed.mp4 -
7.7 MB
005 Datum reference frame is fixed_en.srt -
1.9 KB
005 Datum reference frame is fixed_en.vtt -
1.7 KB
006 Benefits of Datum shift.mp4 -
5.8 MB
006 Benefits of Datum shift_en.srt -
1.5 KB
006 Benefits of Datum shift_en.vtt -
1.3 KB
007 It is not Bonus tolerance.mp4 -
4.5 MB
007 It is not Bonus tolerance_en.srt -
1.2 KB
007 It is not Bonus tolerance_en.vtt -
1.1 KB
008 More Examples.html -
203 bytes
18480442-DATUM-SHIFT-examples.pdf -
522.9 KB
001 TASK 1 - create drawing as per instructions.html -
496 bytes
002 TASK 2 _ Write the statement in words for feature control frame.html -
265 bytes
003 TASK 3 _ Create Drawing.html -
125 bytes
004 TASK 4 _ More Drawings of real parts for Interpretation.html -
103 bytes
18477580-TASK-1-KEY.jpg -
45.8 KB
18477604-TASK-2.jpg -
101.9 KB
18477664-TASK-3-KEY.jpg -
62.0 KB
18477684-TASK-3-DRAWING-FOR-WORK.pdf -
8.0 KB
18477742-TASK-4-DRAWINGS.pdf -
268.0 KB
001 Bonus Lecture - More courses to explore engineering.html -
2.9 KB
external-assets-links.txt -
1.2 KB
Bonus Resources.txt -
357 bytes
Related torrents
| Torrent Name | Added | Size | Seed | Leech | Health |
|---|---|---|---|---|---|
| 2023-10-24 | 510.6 MB | 10 | 4 | ||
| 2023-10-24 | 1.8 GB | 7 | 3 | ||
| 2023-10-22 | 303.8 MB | 5 | 3 | ||
| 2023-10-28 | 1005.1 MB | 9 | 5 | ||
| 2023-10-28 | 996.7 MB | 1 | 3 | ||
| 2023-10-26 | 1.3 GB | 13 | 21 | ||
| 2023-10-22 | 2.2 GB | 2 | 0 | ||
| 2023-06-01 | 909.8 MB | 13 | 5 | ||
| 2023-10-28 | 1.2 GB | 38 | 50 |
Note :
Feel free to post any comments about this torrent, including links to Subtitle, samples, screenshots, or any other relevant information. Watch Udemy Geometric Dimensioning and Tolerancing GD T Basics Full Movie Online Free, Like 123Movies, FMovies, Putlocker, Netflix or Direct Download Torrent Udemy Geometric Dimensioning and Tolerancing GD T Basics via Magnet Download Link.Comments (0 Comments)
Please login or create a FREE account to post comments
Advertisement
